Last Update:

The Charge Controller For Lifepo4 ranking is based on our detailed evaluation and analysis of over 47486 consumer satisfaction surveys. We have come up with the top 10 Best Charge Controller For Lifepo4 However, We tried to make sure that you get only the Best Charge Controller For Lifepo4 from our suggestions. Check our listings-:

Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
No | Product | Score | Action |
---|---|---|---|
1 | ZEALLIFE Solar Panels Charge Controller | 9.8 | Buy On Amazon |
2 | ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V | 9.4 | Buy On Amazon |
3 | 100Amp MPPT Solar Controller 100V Input | 9.4 | Buy On Amazon |
4 | ExpertPower 30A PWM Solar Charge Controller for LifePO4 Battery - 12V / 24V Auto-Select Intelligent Regulator - Max PV Input 55V - USB Charge - Backlight LCD Display | 9 | Buy On Amazon |
5 | Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/LCD Display for AGM | 8.8 | Buy On Amazon |
6 | Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery | 8.6 | Buy On Amazon |
7 | EPEVER 40A MPPT Solar Charge Controller 100V PV Max Input Negative Ground LiFePo4 Battery Charger W/ MT50 Remote Meter & Temperature Sensor Tracer4210AN | 8.6 | Buy On Amazon |
8 | Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium | 8.4 | Buy On Amazon |
9 | WEIZE MPPT Solar Charge Controller Kit | 8.2 | Buy On Amazon |
10 | 30amp Charge Controller, PWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery | 8.2 | Buy On Amazon |
Table of Contents
- Top 10 Best Charge Controller For Lifepo4
- 1. ZEALLIFE Solar Panels Charge Controller
- 2. ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
- 3. 100Amp MPPT Solar Controller 100V Input
- 4. ExpertPower 30A PWM Solar Charge Controller for LifePO4 Battery - 12V / 24V Auto-Select Intelligent Regulator - Max PV Input 55V - USB Charge - Backlight LCD Display
- 5. Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/LCD Display for AGM
- 6. Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
- 7. EPEVER 40A MPPT Solar Charge Controller 100V PV Max Input Negative Ground LiFePo4 Battery Charger W/ MT50 Remote Meter & Temperature Sensor Tracer4210AN
- 8. Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium
- 9. WEIZE MPPT Solar Charge Controller Kit
- 10. 30amp Charge Controller
- How To Choose Best Charge Controller For Lifepo4
Top 10 Best Charge Controller For Lifepo4
In this article we've included our suggestions for the Charge Controller For Lifepo4 after analyzing 47486 reviews.
1. ZEALLIFE Solar Panels Charge Controller
- APPLY TO 12V SOLAR PANELS】:The 8A solar controller is used only for 12V solar panels and 12V batteries.
- THE MAXIMUM INPUT OF SOLAR ENERGY IS 130W】:The maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A.
- EASY TO MONITOR THE LED INDICATOR LIGHTS】: The solar controller integrates two LED lights, both green and red indicator lights on (fully charged) and only the red one (charging).
- QUICK AND EASY CONNECTION】:This solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.
- All-round protection 】:The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
2. ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
- Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto.
- Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management.
- Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
- Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place).
- Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
3. 100Amp MPPT Solar Controller 100V Input
- MPPT charge and discharge solar controller; 100Amp;
- Battery type: LiFePO4, AGM is compatible with more battery charging;
- LCD display (automatically switch to display more parameter information);
- Prevention: Overcharge, overdischarge, overload, overheat, reverse polarity, lightning strike and other protection functions;.
- The solar controller is a professional product.
4. ExpertPower 30A PWM Solar Charge Controller for LifePO4 Battery - 12V / 24V Auto-Select Intelligent Regulator - Max PV Input 55V - USB Charge - Backlight LCD Display
- System Detect: The 30A PWM controller automatically recognizes 12V and 24V systems for quick setup and programmed to maximize LiFePO4 Battery’s life through a meticulous CC-CV charging algorithm.
- Smart Tech: The controller automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit.
- Digital Display: The unit offers an ease-of-access screen interface, displaying data ranging from state of charge to battery health.
- Premium Quality: The controller is built on an industrial-grade chassis, able to withstand all sorts of abuse in harsh conditions.
- ExpertPower: All ExpertPower Charge Controllers operate at their full potential with an ExpertPower LiFePO4 battery and solar panel as the controllers are preset for LiFePO4.
5. Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/LCD Display for AGM
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
6. Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
- Innovative MPPT Design】Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%.
- 12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Full System Protection】Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.
- 4-Stage Safely Charging】Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation.
- Diverse Load Control】 Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
- Remote Monitoring】RS232 communication port allows the Renogy Rover to communicate with the Renogy BT-1 Bluetooth module (NOT included in the package, highly recommend to add-on ) that will enable you to monitor the status and productivity of your panels through the Renogy DC Home App.
7. EPEVER 40A MPPT Solar Charge Controller 100V PV Max Input Negative Ground LiFePo4 Battery Charger W/ MT50 Remote Meter & Temperature Sensor Tracer4210AN
- Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.
- 100V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel ‘s leads to save power loss.
- Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it’s not require setting charging parameters for lithium batteries.
- Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery.
- Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter.
8. Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium
- 12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance.
- Compact in size】Which makes it easy to install virtually anywhere.
- Multiple battery adaptation】 Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Wanderer10A|30A Installation Notes】 The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch.
9. WEIZE MPPT Solar Charge Controller Kit
- EFFICIENT MPPT CHARGE CONTROLLER – Enable the solar panel always to operate at its maximum power point, MPPT solar charge controllers can be up to 30% more efficient than PWM.
- BATTERY PROTECTION – Compatible with various deep cycle battery options: Sealed, Gel, Flooded, Lithium and LiFePO4.
- PROGRAMMABLE DESIGN – LCD screen design for customizing charging voltages of 4-Stage charging: bulk, boost, float, and equalization, and real-time solar energy statistics.
- INSTALLATION READY – The 20A mppt solar controller features a durable die-cast aluminum shell that is perfect for firm fixation and efficient heat dissipation.
- WARRANTY – The MPPT is guaranteed for 1 year against any defect in materials and workmanship.
10. 30amp Charge Controller
- 30A PWM solar controller, Intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery (Sealed, Gel, Flooded) and Lithium battery (LiCoMnNiO2, LiFePO4).
- Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control
- Controller Automatic temperature compensation and Full protection, like Reverse-Polarity, Battery Reverse, Over-Heating,Over-Current, Over-Load, Low-Voltage Lightning Protection.
- 4 stages PWM charging: Bulk, Absorption, Equalize, Float;
- Double USB output 5V/2A and LCD display with Back-lighting shows device’s operating data and working condition.